Author Topic: FileWatcher loads only first two parts  (Read 2769 times)

Offline evlo

  • Member
  • *
  • Posts: 19
FileWatcher loads only first two parts
« on: 13-11-2011, 16:36:48 »
If i move upload with 8 parts to watched folder at once zoom uploader loads only first two parts ... (and if i use option to start zoom with parameter with path to file to add it often freezes and needs to be restarted).
So right now i can chose between constant freezes and need to restart and being able to upload only first two parts of created upload.
Can you please look at file watcher feature? Thanks.
« Last Edit: 13-11-2011, 16:45:42 by evlo »

Offline z_o_o_m

  • Administrator
  • Hero Member
  • *****
  • Posts: 6 844
  • just ask me ;)
    • File & Image Uploader
Re: FileWatcher loads only first two parts
« Reply #1 on: 13-11-2011, 19:26:39 »
proc nepises do ceske sekce a cesky?

monitorovani slozky zalezi jen ja systemu, bohuzel to asi neni uplne spolehlive, jak se zda

kdy presne to zamrza?

Offline evlo

  • Member
  • *
  • Posts: 19
Re: FileWatcher loads only first two parts
« Reply #2 on: 15-11-2011, 01:04:23 »
No, tady bylo vic postu, navic se me tyto technicke veci lepe popisuji v anglitine - proste jem na to zvykli a tezko hledam ceske ekvivalenty.

No ja monitor filesystemu pouzivam z .net 4 a ten funguje dobre, ale jasny me je, ze .net je vpodstete virtualni stroj, takze systemove nezavysli, vubec netusim co pouzivas ty.

Zamrza to kdyz je PC vytizen (100% cpu, 90% linka apod.) a zoomu prijde pozadavek na pridani uploadu (parametr prikazove radky). Zkousel jsem uz projistotu smazat .nast a nepomohlo to. Bohuzel se spouteni kdyz je PC vytizen nevyhnu. S monitorem to v nehorsim nepridalo linky kdyz byl pc vytizenen, ale nezasekl se zoom uploader. Ale zas jak jsem psal - i kdyz je PC vpohode, tak filewatcher nacte jen dve prvni casti rozsekaneho raru (vsechny casti jsou do monitorovane slozky vhozeny zaroven pomoci move).

Ted bohuzel nemam cas na experimenty, ale jak ted pisu tu odpoved, tak me napadlo programove pri presunu parts cekat po kazde jednotlive nejakou danou dobu (treba 500ms), ale je to takove nic moc reseni, prave s ohledem na to, ze vse trva dele, kdyz je PC vytizen. Nicmene az budu mit cas tak to snad zkusim.

Offline z_o_o_m

  • Administrator
  • Hero Member
  • *****
  • Posts: 6 844
  • just ask me ;)
    • File & Image Uploader
Re: FileWatcher loads only first two parts
« Reply #3 on: 15-11-2011, 09:26:36 »
monitorovani slozky je momentalne tak, ze to obsluhuji funkce windows ... a jak jsem zjistil, tak je to k nicemu :D
budu to muset prepsat tak, ze budu kontrolovat celou slozku

divne, program by nemel zamrznout, resp. zrejme mu bude trvat dele, ale mel by pak zas chodit

Offline evlo

  • Member
  • *
  • Posts: 19
Re: FileWatcher loads only first two parts
« Reply #4 on: 16-11-2011, 18:53:57 »
Ne, vazne zamrzne :(. Dokonce zamrzne jednou za cca tyden behu i kdyz pouzivam monitor, zamrzne take prave kdyz je na pc velika zatez. Ale to tak nejak neresim a ziju s tim jako s vlastnosti. Samozrejme lepsi by bylo kdyby to nedelal, ale chapu, ze to asi opravit jen tak nepujde.

Offline evlo

  • Member
  • *
  • Posts: 19
Re: FileWatcher loads only first two parts
« Reply #5 on: 24-11-2011, 19:46:55 »
Tak s delay 2500ms to funguje vcelku spolehlive (zatim), ale stale me na PC co ma jen 2GB ram zoom obcas zatuhne (ja vim, ze 2GB je dnes desne malo a nema asi cenu s tim zabyvat, protoze nikdo krome me to na takove plecce nebude pouzivat)

 

With Quick-Reply you can write a post when viewing a topic without loading a new page. You can still use bulletin board code and smileys as you would in a normal post.

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Name: Email:
Verification:
Human verification ... What is the name of my program? File & Image ********?: